特點、優點

1. REGO-FIX?是ER彈簧夾頭系統的發明者。他們豐富的經驗催生一個優秀的產品系列。
2. 16條槽的設計允許一個較大的夾持范圍并同時擁有最佳的T.I.R.(徑向跳動誤差）
3. 產品規格齊全，從ER8最大到ER50，夾持直徑從0.2mm最大到36mm.
4. 對于小直徑刀具，與同類產品相比多出20%的夾持長度可以得到更好的跳動誤差。


ER標準型筒夾
1)可用于鉆孔、銑削、鉸孔、攻絲和磨削
2)T.I.R.(徑向跳動誤差)≤10μm
規格 可夾持刀具尺寸(mm)
ER8 1/1.5/2/2.5/3/3.5/4/4.5/5
ER11 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7
ER16 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10
ER20 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13
ER25 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/13.5/14/14.5/15/15.5/16/17
ER32 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/13.5/14/14.5/15/15.5/16/17/17.5/18/18.5/19/19.5/20/21/22
ER40 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.512/12.5/13/13.5/14/14.5/15/15.5/16/17/17.5/18/18.5/19/19.5/20/20.5/21/21.5/22/22.5/23/23.5/24/24.5/25/25.5/26/27/28/29/30
ER50 6/8/10/12/14/16/18/20/22/24/25/26/28/30/32/34/36
ER-UP高精度型筒夾
"1)與標準ER夾持范圍相同
2)T.I.R.(徑向跳動誤差)≤5μm
3)用于需要良好T.I.R.的高速切削中
"
規格 可夾持刀具尺寸(mm)
ER8-UP 1/1.5/2/2.5/3/3.5/4/4.5/5
ER11-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7
ER16-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10
ER20-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13
ER25-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/13.5/14/14.5/15/15.5/16/17
ER32-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.5/12/12.5/13/13.5/14/14.5/15/15.5/16/17/17.5/18/18.5/19/19.5/20/21/22
ER40-UP 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5/8/8.5/9/9.5/10/10.5/11/11.512/12.5/13/13.5/14/14.5/15/15.5/16/17/17.5/18/18.5/19/19.5/20/20.5/2121.5/22/22.5/23/23.5/24/24.5/25/25.5/26/27/28/29/30
ER50-UP 6/8/10/12/14/16/18/20/22/24/25/26/28/30/32/34/36